Refine your search

Your search returned 303 results.

Not what you expected? Check for suggestions
Analysis and integration/simulation of automated feedback flight control system of a high manuverability aircraft

by Irtiza, Syed Ali Shah.

Publisher: Risalpur Aerospace Engg Dept, CAE NUST, Risalpur 2004Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 629 IRT / PR 1424 (2).
Structural design and analysis of four seater super mushshak aircraft

by Anees Latif Rana.

Publisher: Risalpur Aerospace Engg Dept, CAE NUST, Risalpur 2004Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 629.13432 RIZ / PR 1423 (3).
Generic bi directional ring network emulator over TCP/IP

by Atiq ul Anam.

Publisher: Risalpur Avionics Engg Dept, CAE NUST, Risalpur 2002Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 378.242 ATI (1).
Study of VSAT system used worldwide MCPC, SCPC- DAMA and TDM_ TDMA type to suggest the most suitable for pakistan

by sardar Ahmad Ashraf.

Publisher: Risalpur Avionics Engg Dept, CAE NUST, Risalpur 2000Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 621.3192 SAR (2).
Design and integration of aerodynamic compensating pitot static tube for a supersonic aircraft

by Adnan Latif Mughal.

Publisher: Risalpur Aerospace Engg Dept, CAE NUST, Risalpur 2004Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 629.134353 ADN / PR 1425 (2).
Optimization of stiffener shapes for aerospace vehicles with semi-monocoque structures

by Yasser Aziz Malik.

Publisher: Risalpur Aerospace Engg dept, CAE NUST, Risalpur 2004Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 629.12 YAS / PR 1421 (2).
Static and dynamic analysis of the HP turbine of a small turbofan engine using finite element method

by Faisal Siddiqui.

Publisher: Risalpur Aerospace Engg Dept, CAE NUST, Risalpur 2007Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 381.4562913 FAI (1).
Static and dynamic analysis of centrifugal compressor impeller of a small turbofan engine using finite element method

by Shahzad Saleem.

Publisher: Risalpur Aerospace Engg Dept, CAE NUST, Risalpur 2007Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 621.5121 SHA (1).
Derivation of closed form expressions for small signal S parameter of GaAs MESFETs

by Shahid Baqar.

Publisher: Risalpur Avionics Engg Dept, CAE NUST, Risalpur 2000Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 621.38 SHA (2).
Study of aerodynamic aspects in airframe engine integration

by Inam ul Haq Raja.

Publisher: Risalpur Aerospace Engg Dept, CAE NUST, Risalpur 2000Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 629.13435 INA / PR 1416 (3).
Structural designing of surface to surface long range cruise missile

by Azhar Sajjad.

Publisher: Risalpur Avionics Engg Dept, CAE NUST, Risalpur 2000Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 623.4519 AZH / PR 1417 (3).
Lectures on Islam part- I

by Abdul Qayum, Prof.

Publisher: Rislapur CAE NUST Risalpur 1996Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 297ABD (13).
Lectures on Islam part- I

by Abdul Qayum, Prof.

Publisher: Rislapur CAE NUST Risalpur 1996Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 297ABD (32).
FINIT ELEMENT ANALYSIS OF CRACK PROPAGATION BEHAVIOR AT A BI-MATERIAL INTERFACE UNDER IMPACT LOADING

by AHMAD JUNAID.

Publisher: RISALPUR AEROSPACE DEPARTMENT CAE NUST RISALPUR 2005Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: 620.0042 AHM (1).
Design and simulation of rhode and schwarz TDMA scheme in simulink for PAF tactical data link

by Muhammad Jahangir, Plt Off 14981.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 115 (1).
Investigation and demonstration of sampling under nyquist rate

by Adnan Hanif, Plt Off 14973.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 116 (1).
Design and implementation control system for quad-rotor UAV

by Abdul Qadir Arslan, Plt Off 14993.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 117 (1).
Concealed object detection using fusion of visual and thermal images

by Syed Adil Babar, Plt Off 14986.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 118 (1).
Study and implementation of MIL-STD-1553 avionics data bus on FPGA

by Zain Ul Arif, Plt Off 14978.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 119 (1).
Study of UPS designs and suggesting ways to improve its efficiency

by Azzam Ijaz Malik, Plt Off 14990.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 120 (1).
Design and development of stand-Alcne remotely controlled bio-acoustic scare crow system

by Faheem Ahmed, Plt Off.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 121 (1).
Image coding for customized image storage and retrieval system for PAF

by Zeeshan Ahmad, Plt Off 14994.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 122 (1).
Design and development of voice command recognition system

by Abid Karim, SGC 50059.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 123 (1).
Design and implementation of a frequency hopping system on a software defined radio: phase III

by Umair Ahmed, Plt Off 14976.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 124 (1).
Automated frequency management system

by Adeel Farrukh, Plt Off 14983.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 125 (1).
Performance validation of 1KW experimental wind turbine

by Umer Ali, Plt Off.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 126 (1).
Design and development of a UAV engine dolly

by Muhammad Shahid, Plt Off.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 127 (1).
Digitization of 10 ton amsler UTM machine

by Umair Baig, Plt Off 15121 69(A) EC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 128 (1).
Identification and analysis of high stress areas of C-130 outer wing using statistical techniques and finite element method

by Amjad Aziz, Plt Off ; Zahid Mehmood, Plt Off; Azfar Adeel, Plt Off.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 129 (1).
Finite element modeling of JF-17 Aircraft fuselage and empennage assembly

by Ali Rauf, Plt Off ; Zirgham Iqbal, Plt Off ; Zubair, SGC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 130 (1).
Acoustic based fault diagnostic system for ATAR-9C engine compressor

by Abdul Manan Khan, Plt Off.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 131 (1).
Development of tools for lateral alignment of mirage engine

by M Umar Khan, Plt Off 15217 69 EC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 132 (1).
CFD and FEM analysis of star sapphire MOD on C-130 aircraft

by Muhamamd Fahad Khan, Plt Off 15219 69 EC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 133 (1).
Urans of von karman street of flow behind centilever cylinder and to compute total deformation using FSI

by Zaheer Abbas, Plt Off 15220 69 EC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 134 (1).
3D CAD modeling of selected components of JF-17 in catia

by Muhamamd Shafique-ur-Rehman, Plt Off 15221; Muhammad Adil Saleem, SGC 51578; Sohaib Ali, Plt Off 15227 69 EC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 135 (1).
Performance enhancement of cooling system of TPS-43G radar fro hot weather conditions

by Ubaid Majid, Plt Off 15223.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 136 (1).
To design a vertical combustion chamber for measuring maximum adiabatic combustion temperature for liquid and gaseous fuels

by Daniyal Saeed, Plt Off 15228; M Fahad, Plt Off 15342.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 137 (1).
Numerical simulation of subsonic and supersonic flow inside flush inlet in particular to study supersonic buzz phenomenon

by Bilal Ahmad, Plt Off 15233 69EC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 138 (1).
Analysis, fabrication and testing of composite leaf spring and its theoratical fatigue analysis

by Muhammad Usman, Plt Off.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 139 (1).
Experimental and theoretical study of creep behaviour of aerospace material

by Omer Iftikhar, Plt Off 15237 69 EC.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 140 (1).
Design and fabrication of ultralight aircraft using incountry resources

by Syed Hassan Mahmood Wasti, N/C 060901; Mohamamd Usman Usmani, N/C 060906 ; Humayan Yousaf, N/C 050803; Muhammad Ali, N/C 060904; Bilal, N/C 060907 69 EC.

Publisher: Risalpur NUST, Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 141 (1).
Finite Element modeling and analysis of JF-17 aircraft

by Muhammad Adnan Khan, Plt Off 15462 69 EC.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 142 (1).
Modeling of 3D layout of fuel system of JF-17 aircraft in catia

by Muhammad Muneeb Safdar, Plt Off 15474.

Publisher: Risalpur NUST Risalpur 2010Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 143 (1).
Structural Analysis of C130 AFT fuselage assembly

by Khurram Shahzad, Plt Off 15471.

Publisher: Risalpur NUST Risalpur 2011Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 144 (1).
Stress Analysis of C-130 aircraft wheel well areas and landing gear assembly during landing

by Omair, Plt Off 15225.

Publisher: Risalpur NUST Risalpur 2011Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 145 (1).
Simulation of T-37 spin recovery in fluent software

by Hasnain Khalid, Plt Off 15481.

Publisher: Risalpur NUST Risalpur 2011Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 146 (1).
FSI modeling of a typical aircraft wing and flutter analysis using ANSYS 12.1

by Emmad Malik, Plt Off 15504.

Publisher: Risalpur NUST Risalpur 2011Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 147 (1).
Design build and fly contest 2011 SHERDILS

by Waqas Akram, Plt Off ; Usman Umer, Plt Off.

Publisher: Risalpur NUST Risalpur 2011Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 148 (1).
Design build and fly contest 2011 HORUS

by Amir Abdullah, Plt Off ; Syed Aoun, Plt Off.

Publisher: Risalpur NUST Risalpur 2011Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 149 (1).
Completion of fabrication, ground testing and flight testing of ultralight aircraft being developed at CAE

by Khaqan Babar, Plt Off 15508 ; Tanveer Hussain, Plt Off 15485 70 EC.

Publisher: Risalpur NUST Risalpur 2011Availability: Items available for loan: College of Aeronautical Engineering (CAE)Call number: PR 150 (1).
© 2023 Central Library, National University of Sciences and Technology. All Rights Reserved.