000			02762nam a22001577a 4500
082			_a621
100			_aHaris, Muhammad _916358
245			_aEnergy Harvesting by Bio Inspired Fins Using Rectangular Cylinders of Different Aspect Ratio / _cMuhammad Haris
264			_aIslamabad : _bSMME- NUST; _c2022.
300			_a64p. _bSoft Copy _c30cm
500			_aIn order to operate a micro electromechanical device, we need a small amount of energy. In this research, we suggested an energy harvesting system based on wake flow for these types of devices. Energy harvesting using piezoelectric flag is a renewable energy source which attain a lot of interest in the research field. The flag oscillates when the fluid force at certain velocity strikes the bluff body. It is positioned at the wake of the cylinder, and it functions as cantilever beam. When the water strikes the bluff body vortices is generated which tend to oscillate the flag and energy is transferred. The kinetic energy of the fluid is converted into electric energy using the piezoelectric flag and supplied directly to the small sensors when needed. Cross section area of the cylinders and different parameters strongly influenced on the power output. To investigate the impact of parameter on the energy harvesting, a flexible flag is used. Detail experimentation was performed to investigate the influence of parameter with change in aspect ratio of cylinder on the power output. In this study, rectangular cylinder of different aspect ratio (1, 1.2 and 1.4) with bio inspired fins (Dorsal, Pectoral and Pelvic) were used. Apart from bluff body, other parameter like streamwise gap (Gx), stiffness of the flag and velocity plays an Important role in the energy harvesting. Total 63 cases were performed in our study and in each case 1 – 1.5min video was recorded to investigate the flapping of the eel. Total nine different type of cylinders was used in our study on which experimentation was done at different streamwise gaps. Streamwise gap (Gx) varies from 1 - 4. By varying the Gx we have found out that at some position the coupling of the wake with the piezoelectric flag is good enough and produce maximum strain. The results concluded that by using Dorsal fins having 1.2 A.R rectangular cylinder gives maximum power. Maximum power was achieved at Gx = 3.5 which is 82.74µW. Minimum power was shown in 1 A.R rectangular cylinder in Dorsal fin at Gx = 1 which is 7.63µW. We had compared the hollow circular cylinder with our study, 5-10% more power was harvested.
650			_aMS Mechanical Engineering _9119495
700			_aSupervisor : Dr. Emad Uddin _9119529
856			_uhttp://10.250.8.41:8080/xmlui/handle/123456789/31077
942			_2ddc _cTHE
999			_c608860 _d608860